Dinitrol 479. Price and reviews
Reviews
Packaged in jars with a capacity of 1 ... 5 l, Dinitrol 479 can be applied to the surface to be treated either by spraying using a conventional air gun, or with a brush. The popularity of the product is due to the not very good condition of domestic roads, and therefore the usual fiberglass fenders of imported cars quickly become unusable. Therefore, polymer protection of body parts located in its lower part is considered the norm. Plus, Dinitrol 479 is also positioned as a means of anti-corrosion protection.
In accordance with the reviews of motorists, the described composition is good for:
- Reducing the noise level in the car.
- Corrosion protection when the car is in a humid environment for a long time.
- Mechanical protection of the bottom from particles of crushed stone and gravel, often found on country roads.
- Providing reliable joints between the elements of the composite bottom of long-term operated vehicles.
However, most users prefer reliability over ease of application, using the primary, concentrated composition of Dinitrol 479, which is applied by hand. Fortunately, the high viscosity and excellent adhesion of the composition to any type of metal coatings contribute to this.
The characteristic features of the composition are:
- Impact insensitive.
- Good adhesion to car parts, regardless of their configuration.
- Efficiency in a wide temperature range (high viscosity forces, when using spray devices, to heat the agent up to at least 600FROM).
- Absence of chemically aggressive components.
With careful processing of the bottom and fender liner, Dinitrol 479 can compete with spray anticorrosives.
Price
The demand for funds is explained not only by its positive operational characteristics, but also by economical use. Sprays, with all the convenience of their application (which is important in conditions of time pressure), still do not guarantee complete penetration of the active substance into hard-to-reach places on the bottom, for example, with a multi-layered arrangement of steel sheets. Lubrication of joints with Dinitrol 479 provides not only the necessary filling of such gaps, but also the absence of losses during processing. In addition, the concentrate is always more effective than its emulsified version (white spirit is usually used as a diluent), especially since there are no chemically aggressive components in the composition of the product. Thus, the specific consumption of Dinitrol 479 per unit surface area is less than for any anticorrosive agent packaged in aerosol cans.
The peculiarities of using this anticorrosive are also natural: the reviews emphasize that you can only work with it in your own garage. But the price is beneficial. When packing in jars of various capacities, the price for the goods is:
- For cans of 5 liters - 4900… 5200 rubles;
- For cans of 1 liter - 1200… 1400 rubles.
Given the wide range of prices from different suppliers, Dinitrol 479 is more profitable to purchase in wholesale auto chemical goods stores, especially since the period of guaranteed use of the composition is up to 3 years.
Summing up the reviews of motorists, we come to the conclusion that the optimal thickness of the anticorrosive layer on the bottom and fender liner should be at least 1,2 ... 1,5 mm. For most brands of passenger cars, up to 5 kg of Dinitrol 479 will be required if both the arches and the bottom are processed at the same time. It follows that purchasing Dinitrol 479 in small containers is not only unprofitable, but also does not guarantee the same operating parameters. It is advisable to use small packing only for small restoration operations.
