Automobile compressor "Agressor": rating of the best models of the manufacturer

It's no secret that any equipment wears out a lot during start-up. These are both increased current values ​​and poor lubrication. The receiver allows you to reduce the number of starts.

In the line of automobile compressors "Agressor" each model has its own characteristics. And it's not just about power. Let's talk about these devices without hiding, let's see through the eyes of real users.

Automobile compressor "Agressor" AGR-30

The Aggressor AGR-30 automobile compressor is the smallest pump in the line in terms of performance. Many scold his cord, for which there is no regular place, but the most important thing is that it simply breaks over time. There are complaints about the lack of a flashlight. You can’t inflate a tire and light at the same time - you have to choose. And it also gets warm if you pump it for a long time.

Most of the shortcomings are caused by design features. The air, intensively compressed by the piston, inevitably heats up, and a hundred and forty-watt electric motor has a hard time when it comes to inflating a car wheel. And it would heat up even more if the injection and lighting modes were combined. The pressure gauge and cord can be attributed to design flaws. The first, by the way, is protected from impacts by a rubber coating and a cap. This is not the best solution. It would be more correct to drown his body. But he copes with the main duties well, without breaking for years.

Automobile compressor "Agressor" AGR-30

Judging by the reviews, this is an inexpensive, reliable, lightweight and compact easy-to-use unit designed for inflating balls, bicycles, air mattresses and tires of small cars. When choosing an AGR-30, keep in mind that its capabilities are limited. With a tire up to R14, he can confidently cope in five minutes, but the wheels of an SUV are no longer for him.

Technical data
Performance	30 l / h
Pressure	7 atm
Power	140 W
Connection option.	Auto socket 12 v
Length of cable	3 m
Hose length	1m
The weight	1.83 kg
dimensions	145 × 70 × 180 mm
Included	Adapters for balls and mattresses

Automobile compressor "Agressor" AGR-35

Compared to its smaller brother, the Aggressor AGR-35 has risen in price a little and added in size and weight, increasing productivity by only 5 l / h, but do not jump to conclusions, because this car compressor has gained the necessary power reserve, and with it work confidence. Now it can develop pressure up to 10 atm and consume current up to 14 A. But the word “overheating” has disappeared from the reviews due to the finning of the cylinder. Let us explain: a piston moves in the compressor cylinder, which creates pressure. The compressed air heats up, the parts of the mechanism expand, the gap between the moving parts (primarily the piston and the cylinder) is reduced, resulting in increased friction, accelerated wear of the cylinder-piston group.

Compressor "Agressor" AGR-35

If excess heat is not removed in time, the cylinder in the piston may jam, and the compressor will permanently fail. Fins located on the vertical part of the device increase the heat transfer surface and ensure reliable operation of a more powerful pump. This is a very big advantage of the model. The previous problem with the quality of the wiring remained.

The pressure gauge of this pump has moved to the hose. This is hardly a good decision. There were crocodiles for connecting directly to the battery terminals and an overheating shutdown function.

Technical data
Performance	35 l / h
Pressure	10 atm
Power	180 W
Connection option.	Auto socket 12 v
Length of cable	3 m
Hose length	5 m
The weight	2.82 kg
dimensions	145 × 80 × 180 mm
Included	Adapters for balls, mattresses, bicycle tires

Automobile compressor "Agressor" AGR-50L

According to the main technical solutions, the Aggressor AGR-50L automobile compressor is the same AGR-35 with increased power. The performance has also increased, but the pressure has remained at the same level, which is correct.

Automobile compressor "Agressor" AGR-50L

The car compressor "Agressor" AGR 18L does not inflate the R50 tire from one time - thermal protection turns off the device. When connected through the cigarette lighter, the fuse in the car may blow.

Technical data
Performance	50 l / h
Pressure	10 atm
Power	280 W
Connection option.	To battery terminals
Length of cable	3 m
Hose length	5 m
The weight	2.92 kg
dimensions	230 × 215 × 190 mm
Included	Adapters for balls, mattresses, bicycle tires, boats, lantern

Automobile compressor "Agressor" AGR-75

This device delivers 75 liters per minute and 300 watts of power. The Aggressor AGR-75 automobile compressor is two-cylinder, the length of the wire and the air hose has increased, but it is impossible to connect to the cigarette lighter due to the high current strength. In a word, it gives the impression of a serious unit, and, judging by the responses, deceptive. The mechanism corresponds to its name and pumps intensively, but does not withstand loads and long-term work. Sometimes the thermal protection does not work either. Compressor overheats and fails.

Automobile compressor "Agressor" AGR-75

Technical data
Performance	75 l / h
Pressure	10 atm
Power	300 W
Connection option.	Auto socket 12 v, "crocodiles"
Length of cable	2.4 m
Hose length	8 m
The weight	2.82 kg
dimensions	225 × 250 × 120 mm
Included	Adapters for balls, mattresses, bicycle tires, boats

Automobile compressor "Agressor" AGR-160

The car compressor "Agressor" AGR-160 is a device with really high performance. It copes with any car ramps, as well as tires for special equipment, inflatable boats and pools. Coincidentally or not, the reviews about it are more favorable than about the two-cylinder AGR-75. The main disadvantage is the strong heating of the duct at the joints. Some find it a little heavy, but the weight matches the power, so this is not a minus.

Automobile compressor "Agressor" AGR-160

Please note that the fins are made completely different from those on the two-cylinder. Frequent low ribs were replaced by more rare, but high ones, which made it possible to remove heat more intensively.

Technical data
Performance	160 l / h
Pressure	10 atm
Power	600 W
Connection option.	To battery terminals
Length of cable	2.4 m
Hose length	8 m
The weight	9.1kg
dimensions	325 × 150 × 230 mm
Included	Adapters for balls, mattresses, bicycle tires, boats

Automobile compressor "Agressor" AGR-3LT

When choosing a compressor, I want it to pump faster, but not overheat, and not be heavy. There are no miracles, but there are good engineering solutions. For example, the Aggressor AGR-3LT autocompressor equipped with a receiver.

Automobile compressor "Agressor" AGR-3LT

The use of the receiver promises certain advantages:

• Extending the life of the compressor. It's no secret that any equipment wears out a lot during start-up. These are both increased current values ​​and poor lubrication. The receiver allows you to reduce the number of starts. Such a compressor does not turn on every time you start pumping air. Its task is only to fill the cylinder to a certain pressure. If, for example, you are painting and you press the spray gun ten times a minute, the compressor will only work when the pressure drops to a minimum. You can quickly pump up a tire or two because there is a lot of high-pressure air stored in the tank.
• The air that has gradually cooled down in the tank will not heat up the supply hose at the connections.
• Air will be supplied to the system in a gradually decreasing pressure mode, and not in jolts. Sometimes it matters.

Carrying such a compressor in the trunk of a car for use every three months is ridiculous. It's more of a garage.

Technical data
Performance	35 l / h
Pressure	8 atm
Power	180 W
Connection option.	Auto socket 12 v, "crocodiles"
Length of cable	2.4 m
Hose length	10 m
The weight	6.4 kg
dimensions	365x 310x 500mm
Included	● adapter for pneumatic tools; ● gun for tires; ● hose extension; ● adapter el. connections from a 12 v socket. to battery terminals.

Automobile compressor "Agressor" AGR-6LT

This is the same apparatus as the previous one, with a large receiver - 6 liters.

One of the owners notes that it is very convenient to carry it in the trunk. The compressor does not need to be removed. There is enough hose for all wheels. While you are pumping, it supports 6 atm.

Automobile compressor "Agressor" AGR-6LT

Technical data
Performance	35 l / h
Pressure	8 atm
Power	180 W
Connection option.	Auto socket 12 v, "crocodiles"
Length of cable	2.4 m
Hose length	10 m
The weight	7.6 kg
dimensions	405x 320x 445mm
Included	● adapter for pneumatic tools; See also: Car interior heater "Webasto": the principle of operation and customer reviews ● gun for tires; ● hose extension; ● adapter el. connections from a 12 v socket. to battery terminals.

Which compressor is not worth buying. Aggressor AGR 35L (be careful when choosing)